S4810 and s6289 are digital output photo ics consisting of a photodiode, schmitt trigger circuit and output transistor, all int egrated on a single chip and molded into a visible-cut, subminiature plastic package. features l low-voltage operation: 2.2 to 7 v l subminiature plastic package with lens l low current consumption l open collector output l S4810: ?h? level output at light input s6289: ?l? level output at light input applications l cameras l tape start/end mark sensor for vtrs, cassette tape recorders, etc. l optical switches l encoders photo ic low-voltage operation photo ic operation at low voltage from 2.2 v S4810, s6289 absolute maximum ratings (ta=25 c) parameter symbol value unit supply voltage vcc -0.5 to +7 v output voltage vo -0.5 to +7 v output current io 8 ma power dissipation p 150 mw operating temperature topr -25 to +85 c storage temperature tstg -40 to +100 c soldering - 260 c, 3 s, at least 2.5 mm away from package surface - electrical and optical characteristics (ta=25 c, vcc=5 v, light source: p=890 nm led, unless otherwise noted) S4810 s6289 parameter symbol condition min. typ. max. min. typ. max. unit supply voltage vcc 2.2 - 7.0 2.2 - 7.0 v low level output voltage v ol i ol =4 ma * 1 - - 0.4 - - 0.4 v high level output current i oh v o =5 v * 2 - - 10 - - 10 a current consumption i cc - 1.3 3 - 1.3 3 ma l h threshold illuminance e lh r l =1.2 k ? --1.5--- w/mm 2 h l threshold illuminance e hl r l =1.2 k ? - - - - - 1.5 w/mm 2 hysterisis - * 3 -0.9- -0.85- - l h propagation delay time t plh - - 10 - - 15 s h l propagation delay time t phl - - 15 - - 10 s rise time tr - 0.07 - - 0.07 - s fall time tf 2 w/mm 2 r l =1.2 k ? - 0.03 - - 0.03 - s peak sensitivity wavelength p - 850 - - 850 - nm *1: S4810: e (illuminance) =0 w/mm 2 , s6289: e=2 w/mm 2 *2: S4810: e=2 w/mm 2 , s6289: e=0 w/mm 2 *3: S4810: e hl /e lh , s6289: e lh /e hl note) connect a 0.01 f capacitor or larger between vcc and gnd.
low-voltage operation photo ic S4810, s6289 (typ. ta=25 ?c) wavelength (nm) relative sensitivity ( % ) 100 80 60 40 20 0 600 700 800 900 1000 1100 1200 (typ. vcc=5 v, normalized at ta=25 ? c, l ? h) 2.0 1.5 1.0 0.5 0 0 1 2 34 5 67 8 supply voltage (v) threshold illuminance (relative value) l ? h -25 ? c h ? l -25 ? c l ? h 25 ? c h ? l 25 ? c l ? h 85 ? c h ? l 85 ? c i f t phl tf tr v ol 10 % 1.5 v 90 % v oh 50 % t plh i f pulse input 5 v vo gnd r l 0.01 f spectral response kpicb0004eb low level output voltage vs. low level output current kpicb0005ea kpicc0038eb s6289 threshold illuminance vs. supply voltage kpicb0006ea kpicb0046ea s6289 S4810 (typ. vcc=5 v, normalized at ta=25 ? c, h ? l) 2.0 1.5 1.0 0.5 0 0 1 2 34 5 67 8 supply voltage (v) threshold illuminance (relative value) h ? l -25 ? c l ? h -25 ? c h ? l 25 ? c l ? h 25 ? c h ? l 85 ? c l ? h 85 ? c 7 v 5 v 2.2 v 0.2 0 low level output current (ma) low level output voltage (v) 0.1 0 5101520 (typ. ta=25 ? c) i f pulse input 5 v vo gnd r l 0.01 f i f t plh vo tr tf v ol 10 % 1.5 v 90 % v oh 50 % t phl response time measurement circuit kpicc0005ea S4810
low-voltage operation photo ic S4810, s6289 7 v 2.2 v 2.0 1.5 1.0 0.5 -50 0 50 100 ambient temperature ( ? c) supply current (ma) (typ. e=0/2 w/mm 2 ) 5 v low level high level 40 30 20 10 0 0 12345 energy density ( w/mm 2 ) propagation delay time (s) (typ. ta=25 ? c, vcc=2.2 v to 7 v, r l =1.2 k w ) S4810: l ? h s6289: h ? l S4810: h ? l s6289: l ? h supply current vs. ambient temperature kpicb0007ea low level output voltage vs. ambient temperature kpicb0008ea threshold illuminance vs. ambient temperature kpicb0009ea propagation delay time vs. input light strength kpicb0010eb rise/fall time vs. load resistance kpicb0011eb directivity kpicb0012ea (typ. i ol =4 ma) 2.2 v 7 v 50 40 30 20 -50 0 50 100 ambient temperature ( ? c) low level output voltage (mv) 5 v S4810: l ? h s6289: h ? l 1.5 1 0.5 0.5 -50 0 50 100 ambient temperature ( ? c) threshold illuminance (relative value) S4810: h ? l s6289: l ? h (typ. v cc =5 v, normalized at ta=25 ? c, S4810: l ? h, s6289: l ? h) 600 500 400 100 0 0.1 load resistance (k w ) rise/fall time (ns) (typ. ta=25 ? c, v cc =2.2 to 7 v, e=2 w/mm 2 ) 1 200 300 10 fall time rise time - 40 ? - 50 ? - 80 ? - 70 ? - 60 ? - 90 ? - 20 ? - 30 ? - 10 ? 0 ? 20 ? 30 ? 60 20 0 60 40 20 40 10 ? relative sensitivity 40 ? 50 ? 80 ? 70 ? 60 ? 90 ? (typ.) 40 % 60 % 80 % 100 % 20 %
hamamatsu photonics k.k., solid state division 1126-1 ichino-cho, higashi-ku, hamamatsu city, 435-8558 japan, telephone: (81) 53-434-3311, fax: (81) 53-434-5184, www.hamamats u.com u.s.a.: hamamatsu corporation: 360 foothill road, p.o.box 6910, bridgewater, n.j. 08807-0910, u.s.a., telephone: (1) 908-231-0 960, fax: (1) 908-231-1218 germany: hamamatsu photonics deutschland gmbh: arzbergerstr. 10, d-82211 herrsching am ammersee, germany, telephone: (49) 8152- 375-0, fax: (49) 8152-265-8 france: hamamatsu photonics france s.a.r.l.: 19, rue du saule trapu, parc du moulin de massy, 91882 massy cedex, france, teleph one: 33-(1) 69 53 71 00, fax: 33-(1) 69 53 71 10 united kingdom: hamamatsu photonics uk limited: 2 howard court, 10 tewin road, welwyn garden city, hertfordshire al7 1bw, unit ed kingdom, telephone: (44) 1707-294888, fax: (44) 1707-325777 north europe: hamamatsu photonics norden ab: smidesv?gen 12, se-171 41 solna, sweden, telephone: (46) 8-509-031-00, fax: (46) 8 -509-031-01 italy: hamamatsu photonics italia s.r.l.: strada della moia, 1/e, 20020 arese, (milano), italy, telephone: (39) 02-935-81-733, fax: (39) 02-935-81-741 information furnished by hamamatsu is believed to be reliable. however, no responsibility is assumed for possible inaccuracies or omissions. specifications are subject to change without notice. no patent rights are granted to any of the circuits described herein. type numbers of products listed inthe specification sheets or supplied as samples may have a suffix "(x)" which means tentative specifications or a suffix "(z)" which means developmental specifications. ?2009 hamamatsu photonics k.k. low-voltage operation photo ic S4810, s6289 cat. no. kpic1005e06 aug. 2009 dn 3.5 5 ? 10 ? visible-cut resin (black) 3.5 0.6 0.4 (specified at the lead root) (1.0) (1.15) 1.6 6.0 1.0 1.3 1.6 0.72 0.57 0.16 r0.45 10 ? 5 ? tolerance unless otherwise noted: 0.2, 2 ? shaded area indicates burr. values in parentheses are not guaranteed, but for reference. v o gnd vcc burr 1.27 1.27 dimensional outline (unit: mm) ambient temperature ( ? c) power dissipation (mw) 0 -25 0 25 50 75 100 300 100 200 (typ.) power dissipation vs. ambient temperature kpicb0048ea kpica0005eb
|
